Honeywell ToxiRAE Pro PID PGM-1800
- Home
- Products
Honeywell ToxiRAE Pro PID PGM-1800
Honeywell ToxiRAE Pro LEL
Honeywell ToxiRAE Pro LEL by RAE Systems is available with wireless and non-wireless models. A single gas detector fitted with a Catalytic Bead sensor for the detection of combustible gases and vapours. Measurement range is 0-100% LEL with 1% LEL resolution. Now with 55 stored correction factors, allowing precise measurement of the target compound.
Wireless versions have an RF modem, operating on 868 MHz transmitting lower explosive limit readings and alarm status. All models have continuous data logging capability. Three months of storage is possible, based on a log rate of one-minute intervals, user-adjustable from 1 to 3,600 seconds.
Alarms audible are 95 dB at 30 cm, vibrating and visible alarm – red LEDs. A man down alarm is also included. Alarms are remotely transmitted on wireless models, enabling a secondary level of protection.
The ToxiRAE Pro LEL detects combustible gases and vapours from paints, coatings, fuels, degreasers, adhesives, solvents, resins, etchers, inks, pesticides and herbicides, plus more. Examples of use; chemical plants, confined space entry, hazmat response and environmental cleanup.
Features
- Maintenance is simplified with the filter, sensor and battery all replaceable
- Sensor response time (T90) < 15 second
- Compatible with Norrscope stocked AutoRAE 2 automatic test and calibration system
- Charger option for five monitors
- Device Management with Honeywell Safety Suite
- Ingress protection IP65
- Intrinsically safe, compact, tough and light
- Large display
- Approvals CSA, ATEX, IECEx and China Ex
- Previously supplied by Sperian
Wireless Features
- Available in wireless and non-wireless models
- RF modem operating on 868 MHz frequency
- Transmits lower explosive limit readings and alarm status
- Remote alarm transmission provides a secondary level of protection
General Specifications
| Detector Type | Single Gas Detector |
|---|---|
| Sensor Type | Catalytic Bead Sensor |
| Gas Type | Combustible gases and vapours |
| Measurement Range | 0-100% LEL |
| Resolution | 1% LEL |
| Stored Correction Factors | 55 |
| Wireless Frequency | 868 MHz |
| Data Logging Capacity | Three months at one-minute intervals |
| Logging Interval | User-adjustable from 1 to 3,600 seconds |
| Alarm Types | 95 dB audible alarm, vibrating alarm, visible red LED alarm, man down alarm |
| Sensor Response Time (T90) | < 15 seconds |
| Ingress Protection | IP65 |
| Approvals | CSA, ATEX, IECEx and China Ex |
| Size | 118 x 60 x 30 mm |
| Weight | 235 g |
Applications
- Chemical plants
- Confined space entry
- Hazmat response
- Environmental cleanup
- Detection of combustible gases and vapours from paints
- Coatings
- Fuels
- Degreasers
- Adhesives
- Solvents
- Resins
- Etchers
- Inks
- Pesticides and herbicides
Supplied With
- Alligator clip
- Protective rubber boot
- Rechargeable battery installed
- Charging and PC communication cradle with cable
- ProRAE Studio II software
- AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC)
- Calibration adapter
- CD documentation
- Quick start guide
- Calibration card
- Quality certificate
- Warranty registration card
Standard Instrument Configurations
Wireless
G02-A033-000 – ToxiRAE Pro LEL, Datalogging, Wireless (868 MHz), Single-Pack
G02-A033-010 – ToxiRAE Pro LEL, Datalogging, Wireless (868 MHz), 10-Pack
G02-H03A-000 – ToxiRAE Pro LEL, Datalogging, Wireless (869 MHz), Customs Union (CU)
Non-Wireless
G02-A030-000 – ToxiRAE Pro LEL, Datalogging, Non-Wireless, Single-Pack
G02-A030-010 – ToxiRAE Pro LEL, Datalogging, Non-Wireless, 10-Pack
G02-H030-000 – ToxiRAE Pro LEL, Datalogging, Non-Wireless, Customs Union (CU)
Replacement Sensor
C03-0911-000 – Combustible Catalytic Bead %LEL Sensor
Enquire About This Product
Get in touch with us to see how we can help you with your project