Crowcon Gas Testers for Gasman & Tetra 3
- Home
- Products
Crowcon Gas Testers for Gasman & Tetra 3
Overview
Crowcon Gas Testers provide a simple and effective solution for ensuring compliance and operational readiness of Gasman and Tetra 3 (T3) gas detectors. By exposing sensors to a known concentration of test gas, the system verifies correct sensor response and confirms that the instrument is functioning properly.
Designed to be cost-effective, fast, and easy to use, Gas Testers support regular bump testing procedures that are increasingly required by industry regulations and company safety policies to ensure worker protection.
Importance of Gas Testing
Regular bump testing confirms that gas detection instruments respond appropriately to hazardous gases. By exposing each sensor to a known gas concentration, users can verify detector performance before use.
If the detector does not respond correctly during testing, it indicates that the instrument requires recalibration or servicing before being returned to operation.
Gas Detection Compatibility
Crowcon Gas Testers support instruments equipped with a wide range of sensors, enabling comprehensive testing across multiple gas types.
- Flammable gas sensors
- Oxygen (O2) sensors
- Carbon Monoxide (CO) sensors
- Hydrogen Sulphide (H2S) sensors
- Carbon Dioxide (CO2) sensors
- Additional sensor options available for Gasman detectors
Fast and Efficient Bump Testing
The Gas Tester is capable of bump testing all four gases in a compatible detector within 60 seconds, helping to minimise downtime and improve operational efficiency.
Cost-Effective Compliance
When used with a fixed flow regulator, gas testing becomes highly economical. A single 34-litre quad gas cylinder can provide approximately 140 bump tests, reducing ongoing operating costs while supporting compliance requirements.
Key Features
- Ensures compliance for Gasman and Tetra 3 (T3) gas detectors.
- Verifies sensor response using known gas concentrations.
- Supports routine bump testing procedures required by safety regulations.
- Compatible with flammable, oxygen, carbon monoxide, hydrogen sulphide, and carbon dioxide sensors.
- Completes four-gas bump testing within 60 seconds.
- Simple and straightforward operation.
- Cost-effective testing with approximately 140 tests per 34L gas cylinder.
- Helps identify detectors requiring calibration or servicing.
Technical Highlights
| Feature | Specification |
|---|---|
| Compatible Detectors | Gasman and Tetra 3 (T3) |
| Testing Method | Bump testing using known gas concentrations |
| Supported Sensors | LEL, O2, CO, H2S, CO2, and others |
| Bump Test Duration | Up to 4 gases in 60 seconds |
| Gas Efficiency | Approximately 140 tests per 34L quad gas cylinder |
| Flow Regulator | Fixed flow regulator (0.5 LPM) |
Order Information
| Order Code | Description |
|---|---|
| GT-GM-03 | Gasman Gas Test Dock (Includes fixed flow regulator and 1m inlet tubing) |
| GT-T3-01 | T3 (Tetra 3) Gas Tester Kit 1 (Includes tester and 1m inlet tubing) |
| GT-T3-02 | T3 (Tetra 3) Gas Tester Kit 2 (Kit 1 plus fixed flow regulator) |
| GT-T3-03 | T3 (Tetra 3) Gas Tester Kit 3 (Kit 2 plus gas cylinder holder) |
| REG01 | Fixed Flow Regulator (0.5 LPM) |
| AC0510 | Gas Cylinder Holder |
| C03289 | 1m Inlet Tubing |
| Specification | Tetra:3 | Gasman |
|---|---|---|
| Size | 12.5(w) x 18.5(l) x 8(d) cm | 12.5 (w) X 19 (l) X 6.6 (d) cm |
| Weight | 0.25kg | 0.25kg |
| Instrument supported | Tetra:3 (T3) | Gasman |
| Gases supported | Flammable, CO, O2, H2S and CO2 | Flammable, CO, O2, H2S, CO2, NH3, NO, ETO, SO2 |
| Test time | Typically 30 seconds | Typically 30 seconds |
| Tests performed |
Sensor response to gas Visual alarm Audible alarm General pass/fail indication |
Sensor response to gas Visual alarm Audible alarm General pass/fail indication |
| Automatic gas delivery | 0.5 litres/minute (lpm) | 0.5 litres/minute |
| Gas inlet/ exhaust | 1/1 | 1/1 |
| Accessories | Tubing, gas cylinder holder, fixed flow regulator | Tubing, gas cylinder holder, fixed flow regulator |
Enquire About This Product
Get in touch with us to see how we can help you with your project