Spectrex SharpEye 40/40R – Single IR Flame Detector

The Single IR Flame Detector detects hydrocarbon-based fuel and gas fires using advanced flame analysis tools. The detector provides early warning of flaming fires by working at 4.5 μm for maximum sensitivity, while providing immunity to false alarms from IR sources such as sunlight and IR projectors.

It is a durable and weather-resistant single IR flame detector featuring a heated window to eliminate condensation and icing, HART capabilities for digital communications, lower power requirements, and a compact, lightweight design.

Due to increased reliability, the 40/40 Series warranty period has been extended to 5 years.

Features

• Sensitivity Selection: To ensure no zone crossover detection. Range options: 1 ft² (0.1m²) n-heptane pan fire at 15 ft (5m) or 50 ft (15m).
• Automatic and Manual Built-In-Test (BIT): To assure continued reliable operation.
• Aluminium or Stainless Steel housing.
• Heated Window: For operation in harsh weather conditions including snow, ice, and condensation.
• Multiple Output Options: For maximum flexibility and compatibility.
  • Relays (3) for Alarm, Fault and Auxiliary
  • 0-20mA (stepped)
  • HART Protocol for maintenance and asset management
  • RS-485, Modbus Compatible
• High Reliability: MTBF – minimum 150,000 hours.
• Safety Integrity: Approved to Safety Integrity Level 2 (SIL2 – TUV).
• User Programmable via HART or RS-485.
• Hazardous Area Zones:
  • Zones 1 & 2 with IIC gas group vapours present
  • Zones 21 & 22 with IIIC dust type present
• Ex Approved:
  • ATEX & IECEx
  • FM/FMC/CSA
  • TR CU (EAC)
• 3rd Party Performance Tested:
  • EN54-10 (VdS)
  • FM3260
• Reliability: IEC61508.

Applications

• Offshore/Onshore Oil & Gas installations and pipelines
• Chemical plants
• Petrochemicals plants
• Storage Tank farms
• Power Generation facilities
• Pharmaceutical Industry
• Printing Industry
• Warehouses
• Automotive
• Waste Disposal facilities

Accessories

• 40/40-001: Tilt, 777090, Stainless Steel
• 777670: 40/40 Duct Mount, Stainless Steel
• 777163: 40/40 Weather Cover, Stainless Steel
• 777166: 40/40 Cone Viewer (laser aimers (2x) not included)
• 777263: 40/40 Weather Cover, ABS Plastic
• 777563: 40/40 FOV Field of View Limiter, Stainless Steel
• 777650: 40/40 Air Shield, Stainless Steel
• 789260-1: Pole Mount (U-BOLT) – 3″, Stainless Steel
• 789260-2: Pole Mount (U-BOLT) – 2″, Stainless Steel
• 789260-3: Pole Mount (U-BOLT) – 4″, Stainless Steel
• 794079: USB/RS485 Converter Kit
• 888810: HART Hand Held Diagnostics Unit (ATEX IS)

Product Note: A low-cost flame detector best suited to indoor applications where false alarm stimuli are not present.