Crowcon Sensitron Smart 3H Lite Gas Detector

  1. Home
  2. Products

Crowcon Sensitron Smart 3H Lite Gas Detector

The Smart 3H Lite has been designed to monitor the refrigerant gases and carbon dioxide in hotels and residential areas.

The design aims to have a cost-effective product, thanks to the presence of a special infrared sensor.

Three intelligent LEDs that uniformly illuminate the semi-transparent crown constantly display the detector status.

The Smart 3H Lite gas detector is developed in two versions, one powered at 12-24 Vdc and one at 90-240 Vac; in both versions, there is an RS485 serial output and two relays.

The housing is made of polycarbonate and has an IP42 degree of protection.

Order Information

SMART 3-H LITE – Refrigerant Gases (Infrared Sensor)

Range: 0–20% LFL

Part Number Description Alarm Thresholds
S3843R32 R32 DIFLUOROMETHANE detector 5% & 10% LFL
S3844R1234YF R1234yf detector 5% & 10% LFL
S3845R1234ZE R1234ze detector 5% & 10% LFL
S3848R454A R454A detector 5% & 10% LFL
S3849R454B R454B detector 5% & 10% LFL
S3850R454C R454C detector 5% & 10% LFL
S3851R452B R452B detector 5% & 10% LFL

Range: 0–5000 ppm

Part Number Description Alarm Thresholds
S3846R134A R134a detector 1000 & 2000 ppm
S3847R410A R410A detector 1000 & 2000 ppm
S3854R32 R32 detector 1000 & 2000 ppm
S3855R404A R404A detector 1000 & 2000 ppm
S3856R407C R407C detector 1000 & 2000 ppm
S3857R1234YF R1234YF detector 1000 & 2000 ppm
S3858R1234ZE R1234ZE detector 1000 & 2000 ppm
S3859CO2 CO2 detector 1000 & 2000 ppm

Calibration Tools

Part Number Description
STS/CKD+ Enhanced calibration keypad with 7-digit display. It can be connected to SENSITRON’S SMART detectors to adjust the Zero, Span and 4–20 mA values.
Application Hotel and residential
Sensing element Infrared
Predicted sensor life >5 years
Gas detected R32, R1234YF, R1234ZE, R454A, R454B, R454C, R452B, R134A, R410A, R404A, R407C, CO2
Fullscale 0-20% LFL
0-5000 ppm
Alarm thresholds 5 e 10% LFL
1000 e 2000 ppm
Power supply 12-24 Vdc or 90-240 Vac
Signal output 2 relays; RS485 serial output
Power consumption 150 mA at 24 Vdc
Relays contact rating 1.0 A at 30 Vdc
Optical indications 3 smart LEDs
Acoustic indications Buzzer 70 dB
Hall effect sensor Yes, for buzzer silence
Material Polycarbonate
Dimensions D: 95.5mm H:52.5 mm
Weight 200 g
Cable entries Lateral entry: pre-formed guide that can be drilled for M16 fairlead (supplied with the gas detector)
Entry on the bottom: 10 mm hole.
IP grade IP42
Storage temperature -40 / +85°C
Operating temperature -10 / +50°C
Operating humidity 0 / 95% RH non condensing
EMC EN 61000-6-3:2007 + A1:2011; EN 50270:2015
Refrigeration Standards EN 378-3; EN 14624; EN 50676; IEC 60335-2-40 Annex LL; ISO 5149-3; F-Gas Regulation

Enquire About This Product

Get in touch with us to see how we can help you with your project

Thank you Message Sent
Error occurred while sending email. Please try again later.